|
| |
|
| |
Paragon CFL Streetlight Luminaire SCE12
|
| |
|
| |
| |
 |
|
LUMINAIRE: Comprises a canopy deep drawn from CRCA MS sheet, epoxy powder coated in red colour. A control gear tray cum reflector having white stove enamel finish on reflecting surface is fixed to the canopy. A serrated acrylic diffuser and gasket makes the luminaire weather proof. The diffuser is fixed to the conopy by screws at the ends. Luminaire is prewired with vacuum pressure impregnated copper ballasts, lamp holder and mains connector.
|
|
| |
CABLE ENTRY: Is through mounting pipe & terminated on the mains connector inside the control gear compartment.
MOUNTING: Suitable for end mounting with a pipe having 32 mm O.D. Pipe. A MS adapter facilitates mounting on the wall. A cluster mounting arrangement can also be provided for mounting more than one luminaire.
RELAMPING: The clear acrylic diffusers can be hinged for lamp replacement and the reflector cum gear plate can be hinged for accessories maintenance.
APPLICATIONS: Suitable for lighting minor routes, access roads, parking lots, perimeter lighting etc. |
| |
| SCE1209 |
CFL |
1 |
9 |
230 |
0.17 |
335 |
78 |
108 |
1.5 |
6 |
| SCE1211 |
CFL |
1 |
11 |
230 |
0.15 |
335 |
78 |
108 |
1.5 |
6 |
| SCE1213 |
CFL |
1 |
13 |
240 |
0.17 |
335 |
78 |
108 |
1.5 |
6 |
| SCE1218 |
CFL |
1 |
18 |
240 |
0.22 |
335 |
78 |
108 |
1.5 |
6 |
|
| |
P / CLS - Cluster mounting arrangement.
So319018 - Wall mounting bracket. To be ordered. Separately. |
| |
| |
| --------------------------------------------------------------------------------------------------------------------------------------- |
 |
| |
| |
Paramount CFL Streetlight Luminaire SCE 13
|
| |
|
| |
 |
|
LUMINAIRE: Comprises a canopy fabricated from CRCA MS sheet epoxy powder coated . A control gear tray cum reflector having white stove enamel finish on reflecting surface is fixed to the canopy and can be hinged for maintenance purpose. A ribbed acrylic diffuser and gasket makes the luminaire weather proof. The diffuser is held in a frame which is locked in position by toggles at the sides. Luminaire is prewired with vacuum pressure impregnated copper ballasts, lamp holders and mains connector.
|
|
| |
CABLE ENTRY: Is through mounting pipe & terminated on the mains connector inside the control gear compartment.
MOUNTING: Suitable for end mounting with a pipe having 32 mm O.D. pipe.
RELAMPING: The enframed diffusers can be opened for lamp replacement and the reflector cum gear plate can be hinged for accessories maintenance.
APPLICATIONS: Suitable for lighting minor routes, access roads, perimeter lighting etc.
|
| |
| |
| SCE1329 |
CFL |
2 |
9 |
230 |
0.15 |
368 |
103 |
125 |
1.4 |
6 |
| SCE13211 |
CFL |
2 |
11 |
230 |
0.3 |
368 |
103 |
125 |
1.4 |
6 |
| SCE13213 |
CFL |
2 |
13 |
240 |
0.34 |
368 |
103 |
125 |
1.4 |
6 |
| SCE13218 |
CFL |
2 |
18 |
240 |
0.44 |
368 |
103 |
125 |
1.4 |
6 |
| SCE1336 |
CFL |
2 |
36 |
240 |
0.61 |
486 |
103 |
125 |
1.7 |
6 |
|
| |
| |
| --------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
| |
Streetlight Luminaire MSC11-SSC11-MHSC11
|
| |
|
| |
 |
|
LUMINAIRE: Comprises one piece housing of die cast LM6 aluminium. Lamp compartment has stove enamel white finish from inside and hammertone grey from outside. An elegantly shaped, high transparency clear acrylic cover is held in position by stainless steel toggles. Control gear compartment houses a detachable gear tray and is wired with copper wound ballast, power factor improvement capacitor and mains connector. An electronic ignitor is provided in case of HPSV/MH luminaires. A felt gasket ensures weather proofness and also prevents entry of insects inside the housing.
|
|
| |
REFLECTOR: A pair of pre-anodised parabolic aluminium reflector is mounted inside the lamp compartment for high optical efficiency.
CABLE ENTRY: Is through mounting pipe and terminated on mains connector inside the control gear housing
MOUNTING: Controlgear compartment facilitates mounting on pipe having upto 60 mm O.D.
RELAMPING: Can be carried out easily by releasing toggles and opening acrylic cover, which is hinged to one end of control gear housing.
APPLICATIONS: Suitable for illuminating roads and highways having high density & fast traffic routes etc. |
| |
| MSC1125IH |
HPMV |
1 |
250 |
E - 40 |
240 |
1.32 |
605 |
303 |
315 |
6.5 |
2 |
| SSC1115IH |
HPSV |
1 |
150 |
E - 40 |
240 |
0.74 |
605 |
303 |
315 |
6.5 |
2 |
| SSC1125IH |
HPSV |
1 |
250 |
E - 40 |
240 |
1.3 |
605 |
303 |
315 |
8 |
2 |
| MHSC1125IH |
MH |
1 |
250 |
E - 40 |
240 |
1.3 |
605 |
303 |
315 |
8 |
2 |
|
|
| |
| |
| --------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
| |
Streetlight Luminaire MSP12-SSP12-MHSP12_002
|
| |
|
| |
 |
|
LUMINAIRE: Comprises a deep drawn aluminium canopy. An elegantly shaped high transparency, clear acrylic cover of excellent optical transmittance is clamped rigidly to the canopy by stainless steel toggles. Control gear housing is of Lm6 die-cast aluminium and is wired with heavy duty copper wound polyester ballast, power factor improvement capacitor and mains connector. Luminaire is in stoved enamel hammer tone grey finish from outside & white inside. An electronic ignitor is provided in case of HPSV/MH luminaires. A felt gasket ensures weather proofness and also prevents entry of insects inside the lamp housing.
|
|
| |
CABLE ENTRY: Is through mounting pipe & terminated on the mains connector inside the control gear compartment.
RELAMPING: Can be carried out easily by releasing toggles and opening acrylic cover, which is hinged to one end of lamp canopy.
MOUNTING: Control gear compartment facilitates mounting on pipe having 35 to 50 mm O.D.
APPLICATIONS: For illumination of traffic routes access roads etc.
REFLECTOR: Internal surface of canopy acts as reflector. It is electrochemically brightened and anodised for high photometric performance and longevity. |
| |
| MSP1225IH |
HPMV |
1 |
250 |
E - 40 |
240 |
1.32 |
663 |
362 |
260 |
6.8 |
4 |
| SSP1215IH |
HPSV |
1 |
150 |
E - 40 |
240 |
0.74 |
663 |
362 |
260 |
6.8 |
4 |
| SSP1225IH |
HPSV |
1 |
250 |
E - 40 |
240 |
1.30 |
663 |
362 |
260 |
7.8 |
4 |
| MHSP1225IH |
MH |
1 |
250 |
E - 40 |
240 |
1.30 |
663 |
362 |
260 |
7.8 |
4 |
|
|
| |
| --------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
| |
Streetlight Luminaire MSS13-SSS13-MHSS13
|
| |
|
| |
 |
|
LUMINAIRE: Comprises of single piece deep drawn aluminium housing in stove enamel hammer tone grey finish from outside and white inside. An elegantly shaped high transparency clear acrylic cover is held in position by stainless steel toggles .The control gear compartment houses a copper wound ballast, power factor improvement capacitor and mains connector. An electronic ignitor is provided in case of HPSV/MH luminaires. A felt gasket is provided to make the luminaire insect proof and weather proof.
|
|
| |
REFLECTOR: A pair of pre anodised aluminium reflector ensures high optical efficiency.
CABLE ENTRY: Is through mounting pipe and terminated on mains connector inside the control gear housing .
MOUNTING: Control gear compartment facilitates mounting on pipe having 35 to 50 mm O.D.
RELAMPING: Can be carried out easily by releasing toggles and opening acrylic cover which is hinged to control gear housing.
APPLICATIONS: Suitable for illuminating major traffic routes, access roads etc. |
| |
| MSS1325IH |
HPMV |
1 |
250 |
E - 40 |
240 |
1.32 |
628 |
303 |
322 |
5.8 |
2 |
| SSS1325IH |
HPSV |
1 |
250 |
E - 40 |
240 |
1.30 |
628 |
303 |
322 |
7.6 |
2 |
| MHSS1325IH |
MH |
1 |
250 |
E - 40 |
240 |
1.30 |
628 |
303 |
322 |
7.6 |
2 |
|
| |
| |
| --------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
| |
Streetlight Luminaire MSS14-SSS14-MHSS14
|
| |
|
| |
 |
|
LUMINAIRE: Comprises a single piece deep drawn aluminium housing in stove enamel hammer tone grey finish from outside . An elegantly shaped high transparency clear acrylic cover is held in position by stainless steel toggles .The control gear compartment houses a copper wound ballast, power factor improvement capacitor, and mains connector. An electronic ignitor is provided in case of HPSV/MH luminaires. A felt gasket is provided to make the luminaire insect proof and weather proof.
|
|
| |
REFLECTOR: Pre anodised aluminium reflectors ensures high opticalefficiency.
CABLE ENTRY: Is through mounting pipe and terminated on mains connector inside the control gear housing
MOUNTING: Control gear compartment facilitates mounting on pipe having 60 mm max O.D.
RELAMPING: Can be carried out easily by releasing toggles and opening acrylic cover which is hinged to control gear housing.
APPLICATIONS: Suitable for illuminating major traffic routes, access roads etc. |
| |
| MSS1425IH |
HPMV |
1 |
250 |
E - 40 |
240 |
1.32 |
655 |
380 |
263 |
6.25 |
2 |
| SSS1425IH |
HPSV |
1 |
250 |
E - 40 |
240 |
1.3 |
655 |
380 |
263 |
7.62 |
2 |
| MHSS1425IH |
MH |
1 |
250 |
E - 40 |
240 |
1.3 |
655 |
380 |
263 |
7.62 |
2 |
|
| |
Above luminaires suitable for mounting on pipe having 50mm O.D. are also available Cat.Ref. for which are SSS1525IH, MSS1525IH and MHSS1525IH for 250 W HPSV, HPMV and MH lamps respectively. |
| |
| |
| |
| --------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
| |
Streetlight Luminaire SSG13_MHSG13
|
| |
|
| |
 |
|
LUMINAIRE: Comprises a deep drawn aluminium lamp compartment & diecast LM6 aluminium control gear housing. Luminaire has stove enamel hammer tone grey finish outside. An elegantly shaped high transparency clear acrylic cover is held in position by stainless steel toggles .The control gear housing is prewired with a copper wound ballast, power factor improvement capacitor, electronic ignitor and mains connector. A felt gasket impregnated with insecticide prevents entry of insects inside the lamp housing.
|
|
| |
REFLECTOR:PRECISION OPTICS TECH (POT): Lamp compartment acts as a reflector known as 'POT' for light control in longitudunal and transverse direction. It is electrochemically brightened and anodised aluminium reflector for better uniformity and high optical efficiency.
CABLE ENTRY: Is through the mounting pipe and terminated on a 2-way connector inside the control gear housing.
RELAMPING: Can be done easily by releasing toggles and opening acrylic cover which is hinged.
MOUNTING: Extended portion of control gear housing facilitates mounting on pipe having 40 to 50 mm O.D.
APPLICATIONS: Suitable for illuminating highways & roads with high density traffic. |
| |
| SSG1315IH |
HPSV - T |
1 |
150 |
240 |
0.74 |
630 |
295 |
302 |
7.1 |
8 |
| SSG1325IH |
HPSV - T |
1 |
250 |
240 |
1.3 |
630 |
295 |
302 |
8.6 |
8 |
| MHSG1325IH |
MH - T |
1 |
250 |
240 |
1.3 |
630 |
295 |
302 |
8.6 |
8 |
| MHSG1325IHM? |
MH - T |
1 |
250 |
240 |
1.3 |
630 |
295 |
302 |
7.1 |
8 |
|
| |
| *Suitable only for HPIT + 250 W Philips make Metal halide lamp. |
| |
|
| |
|
