|
| |
|
| |
Decolux Decorative Streetlight Luminaire SSDC11
|
| |
|
| |
 |
|
LUMINAIRE: Comprises a diecast LM6 aluminium rim which holds the POT (precision optics technology) reflector, gear tray, spun aluminium top bowl, clear acrylic bottom bowl and mounting pipe. Luminaire is prewired with copper wound polyester ballast, power factor improvement capacitor, electronic ignitor and mains connector. The top bowl is available in choice of colours. Both the bowls are held together by synthetic rubber gasket and toggles making the luminaire dustproof.
|
|
| |
CABLE ENTRY: Is through mounting pipe and terminated on mains connector inside the control gear housing.
MOUNTING: Suitable for pipe having 60 to 100 mm O.D.
RELAMPING: Can be easily done by releasing toggles and removing the hemispherical bowls.
APPLICATIONS: Ideal for roads and junctions where ornamental lighting is required. |
| |
| SSDC1115 IH |
HPSV - T |
1 |
150 |
240 |
0.74 |
552 |
476 |
710 |
12 |
1 |
| SSDC1125 IH |
HPSV - T |
1 |
250 |
240 |
1.30 |
552 |
476 |
710 |
13.5 |
1 |
| MHSDC1115 IH |
MH - T |
1 |
150 |
240 |
0.74 |
552 |
476 |
710 |
12.5 |
1 |
| MHSDC1125 IH |
MH - T |
1 |
250 |
240 |
1.30 |
552 |
476 |
710 |
13.5 |
1 |
| MHSDC1125IHM |
MH - T |
1 |
250 |
240 |
1.30 |
552 |
476 |
710 |
12 |
1 |
|
| |
Ballast to be ordered separately.
*Suitable only for HPIT + 250 W Philips make Metal halide lamp. |
| |
| |
| --------------------------------------------------------------------------------------------------------------------------------------- |
 |
| |
| |
Fluorescent Tube Streetlight Luminaire SFE
|
| |
|
| |
 |
|
LUMINAIRE: Comprises canopy of sheet aluminium in stove enamel finish (CRCA MS epoxy powder coated white in case of SFE13). A control gear tray cum reflector having white stove enamel finish on reflecting surface is hinged to the canopy. An acrylic perspex and gasket makes the luminaire weather proof . The perspex is held in a frame which is locked in position by toggles on both sides. Prewired with copper wound polyester ballast, power factor improvement capacitor, push fit type lamp holder and mains connector (SFE14 & SFE 24 are prewired with aluminium ballast)
|
|
| |
MOUNTING & CABLE ENTRY: Suitable for end mounting on pipe having 38 mm O.D. for twin tube and 32 to 35 mm O.D. for single tube version respectively.
RELAMPING: The enframed diffusers can be hinged for lamp replacement and the reflector cum gear plate can also be hinged for accessories maintenance.
APPLICATIONS: Suitable for secondary roads having less traffic density, residential areas, perimeter lighting etc. |
| |
| SFE14H |
FTL |
1 |
36 / 40 |
Bi - Pin |
240 |
0.23 |
1310 |
103 |
120 |
2.8 |
6 |
| SFE24H |
FTL |
2 |
36 / 40 |
Bi - Pin |
240 |
0.45 |
1345 |
130 |
148 |
3.3 |
6 |
| SFT24H / TW |
FTL |
2 |
36 / 40 |
Bi - Pin |
240 |
0.45 |
1345 |
130 |
148 |
3.3 |
6 |
| SFE1214HSB |
FTL |
1 |
36 / 40 |
Pushfit |
240 |
0.23 |
1275 |
104 |
100 |
2.1 |
6 |
| SFE1214HDB |
FTL |
1 |
36 / 40 |
Pushfit |
230 |
0.23 |
1275 |
104 |
100 |
2.1 |
6 |
| SFE1314HSB |
FTL |
1 |
36 / 40 |
Pushfit |
240 |
0.23 |
1275 |
104 |
100 |
2.1 |
6 |
| SFE1314HDB |
FTL |
1 |
36 / 40 |
Pushfit |
230 |
0.23 |
1275 |
104 |
100 |
2.1 |
6 |
|
| |
SFE14H & SFE24H can be offered with top mounting arrangement in which case the cat.ref. would read as SFT14H & SFT24H respectively. |
| |
| |
| --------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
| |
Optolux Streetlight Luminaire_SSG1107, MHSSG1107
|
| |
|
| |
 |
|
LUMINAIRE: Comprises a single piece deep drawn aluminium housing in stove enamel hammer tone grey finish from outside. An elegantly shaped high transparency clear acrylic cover is held in position by stainless steel toggles .The control gear compartment is prewired with copper wound polyester ballast, power factor improvement capacitor, electronic ignitor and mains connector. A felt gasket impregnated with insecticide prevents insect entry inside the housing.
|
|
| |
CABLE ENTRY: Is through mounting pipe & terminated on the mains connector inside the control gear compartment. RELAMPING: Acrylic cover can be hinged for lamp replacement and maintenance.
MOUNTING: End mounting type suitable for pipe having 35 mm to 50 mm O.D.
APPLICATIONS: Suitable for illuminating minor traffic
REFLECTOR: The inner surface of the lamp compartment is anodised and imparted sand blasted matt finish to act as a reflector. |
| |
| SSSG1107IH |
HPSV - T |
1 |
70 |
240 |
0.46 |
455 |
210 |
203 |
3.57 |
2 |
| MHSSG1107IH |
MH (clear) |
1 |
70 |
240 |
0.46 |
455 |
210 |
203 |
3.57 |
2 |
|
| |
SSSG1107IH (NI): Does not have electronic ignitor in control housing. Use with 70 W(I) HPSV lamp with inbuilt ignitor.
SSSG1107IH (WI): Has electronic ignitor in control housing. Use with 70 W HPSV lamp with inbuilt ignitor. |
| |
| |
| --------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
| |
Optolux Streetlight Luminaire SSSG1115-25
|
| |
|
| |
 |
|
LUMINAIRE: Comprises a single piece deep drawn aluminium housing in stove enamel hammer tone grey from outside. An elegantly shaped high transparency clear acrylic cover is held in position by stainless steel toggles .The control gear compartment is prewired with copper wound polyester ballast, power factor improvement capacitor, electronic ignitor and mains connector. A felt gasket impregnated with insecticide prevents insect entry inside the housing.
|
|
|
RELAMPING: Acrylic cover can be hinged for lamp replacement and maintenance.
MOUNTING: End mounting type suitable for pipe having 60 mm O.D.
APPLICATIONS: Suitable for illuminating traffic routes, highways having high density traffic etc.
REFLECTOR: The inner surface of the lamp compartment is anodised and imparted sand blasted matt finish to act as a reflector.
CABLE ENTRY: Is through mounting pipe & terminated on the mains connector inside the control gear compartment. |
| |
| SSSG1115IH |
HPSV - T / E |
1 |
150 |
240 |
0.74 |
590 |
305 |
300 |
5.56 |
2 |
| SSSG1125IH |
HPSV - T / E |
1 |
250 |
240 |
1.3 |
590 |
305 |
300 |
7 |
2 |
| MHSSG1125IH |
MH - T / E |
1 |
250 |
240 |
1.3 |
590 |
305 |
300 |
7 |
2 |
|
| |
| |
| |
| --------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
| |
Panchayat Fluorescent Tube Streetlight Luminaire SFE1414
|
| |
|
| |
 |
|
LUMINAIRE: Comprises canopy of CRCA MS in stove enamel hammertone grey finish . A control gear tray cum reflector having white stove enamel finish on reflecting surface is hinged to the canopy. An acrylic perspex and gasket makes the luminaire weather proof . The perspex is held in a frame which is locked in position by toggles on both sides. Luminaire is prewired with copper wound polyester ballast, bipin lamp holder and mains connector.
|
|
| |
MOUNTING & CABLE ENTRY: Suitable for end mounting on pipe having 32 to 35 mm O.D.
RELAMPING: The enframed diffusers can be hinged for lamp replacement and the reflector cum gear plate can also be hinged for accessories maintenance.
APPLICATIONS: Suitable for secondary roads having less traffic density in rural areas, residential areas, perimeter lighting etc. |
| |
| SFE1414LSB |
FTL |
1 |
36 / 40 |
Bi - Pin |
240 |
0.23 |
1270 |
80 |
115 |
2.8 |
6 |
|
| |
|
|
| |
|
