|
| |
|
| |
Over the years streetlights have undergone a steady transformation into energy efficient streetlight stystems with higher degreee of IP protection. Streetlight luminaires suitable for HPSV, HPMV, MH, FTL, & CFL lamps are available in various configurations viz- single piece deep drawn aluminium, single piece die cast aluminium, two piece construction with deep drawn sheet canopy and die cast control gear housing. |
|
 |
|
| The optics for streetlight luminaires comprises either a pair of parabolic reflectors or 'P.O.T.' reflector for precise illumination. All these are designed to suit the specific street lighting requirements of our customers. |
| |
| |
| |
Streetlight - Citivision II - SSGN1215IH
|
| |
| Features : - |
- Single piece die cast Aluminium housing
- Detachable gear tray for ease of maintenance.
- Bright anodised Aluminium reflector with staircase optics (POT)
- IP 65 protection for complete luminaire.
- Suitable for 150W HPSV-T lamp only.
- Available in both version- Full glass and Acrylic
|
|
 |
|
| |
| |
| --------------------------------------------------------------------------------------------------------------------------------------- |
 |
| |
| |
Streetlight - Citivision II - SSGN1215IH/FG
|
| |
| Features : - |
- Single piece die cast Aluminium housing
- Detachable gear tray for ease of maintenance.
- Bright anodised Aluminium reflector with staircase optics (POT)
- IP 65 protection for complete luminaire.
- Suitable for 150W HPSV-T lamp only.
- Available in both version- Full glass and Acrylic
|
|
 |
|
| |
| |
| --------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
| |
ACCELERATION STREETLIGHT LUMINAIRE SSGU/MHSGU [IP66 For Lamp
Compartment
And IP54 For Control Gear Compartment]
|
| |
 |
| |
 |
|
CABLE ENTRY: Incoming wires terminate on the mains connector inside the control gear housing.
MAINTENANCE: Acrylic cover can be hinged for lamp replacement by opening the toggles.
|
|
|
MOUNTING: End mounting on GI pipe having maximum 60 mm O.D. APPLICATIONS: Ideal for metropolitan street illumination requirements where regular maintenance is not feasible such as express ways, arterial routes & important city roads with high density traffic.
LUMINAIRE: Comprises elegantly shaped single piece diecast LM6 aluminium housing in stove enamel grey finish from outside. An elegantly shaped high transparency clear acrylic cover is held in position by stainless steel toggles .The controlgear compartment houses a detachable gear tray with a copper wound ballast, power factor improvement capacitor electronic ignitor and mains connector. Provision is made for varying lamp positions to suit different installation parameters. A synthetic rubber gasket ensures high degree of ingress protection.
REFLECTOR -PRECISION OPTICS TECH (POT): Lamp compartment is fitted with a reflector known as 'pot' for light control in longitudunal and transverse direction. It is electrochemically brightened and anodised aluminium reflector for better uniformity and high optical efficiency. |
| |
 |
| |
| SSGU15IH |
HPSV - T |
1 |
150 |
240 |
0.74 |
715 |
350 |
336 |
9 |
2 |
| SSGU25IH |
HPSV - T |
1 |
250 |
240 |
1.3 |
715 |
350 |
336 |
11 |
2 |
| MHSGU25IH |
MH - T |
1 |
250 |
240 |
1.3 |
715 |
350 |
336 |
11 |
2 |
| MHSGU25IHM |
MH - T |
1 |
250 |
240 |
1.3 |
715 |
350 |
336 |
9 |
2 |
|
| |
*Suitable only for HPIT + 250 W Philips make Metal halide lamp. Option of the luminaire with glass instead of acrylic cover also available. Add suffix '/ G' to the Cat. ref. (e.g. SSG25IH / G). |
| |
| |
| ----------------------------------------------------------------------------------------------------------------------------------- |
|
| |
| |
CFL PARKING LIGHT SCPL [IP143]
|
| |
|
| |
 |
|
LUMINAIRE: Comprises a circular canopy fabricated from CRCA MS sheet painted in brilliant green from outside and white from inside. A control gear tray with bright anodised aluminium reflector is fixed to the canopy and can be hinged for maintenance. A acrylic diffuser and gasket makes the luminaire weather proof. The diffuser is held in a frame which is locked in position by toggles at the sides. Luminaire is prewired with vacuum pressure impregnated copper ballasts, lamp holders and mains connector.
|
|
| |
CABLE ENTRY: Is through mounting pipe & terminated on the mains connector inside the control gear compartment.
MOUNTING: Suitable for end mounting on a pipe having 35 to 50 mm O.D. Pipe.
RELAMPING: The clear acrylic diffusers can be hinged for lamp replacement and the reflector cum gear plate can be hinged for accessories maintenance.
APPLICATIONS: Suitable for car parking lots, perimeter lighting etc. |
| |
| SCPL218 |
CFL |
1 |
18 |
240 |
0.44 |
302 |
315 |
360 |
185 |
2.29 |
4 |
| SCPL226 |
CFL |
1 |
26 |
230 |
0.32 |
302 |
315 |
360 |
185 |
2.4 |
4 |
|
| |
| |
| ---------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
| |
MINILITE LUMINAIRE : TLN IP120
|
| |
|
| |
 |
|
LUMINAIRE: Comprises a single piece diecast LM6 aluminium housing in stove enamel grey finish from outside. A toughened heat resistant clear glass covers the lamp compartment . The control gear housing has a diecast aluminium cover hinged to the lamp compartment partition. The glass and control gear housing cover are held in position by stainless steel toggles. Control gear compartment houses a detachable gear tray with a copper wound ballast, power factor improvement capacitor electronic ignitor and mains connector. A synthetic rubber gasket ensures high degree of ingress protection.
|
|
| |
CABLE ENTRY: Incoming wires terminate on the mains connector inside the control gear housing.
MAINTENANCE: The glass cover and control gear cover can be hinged for lamp replacement and accessories maintenance by opening the toggles.
MOUNTING: Extended position of control gear housing facilitates mounting on GI pipe having maximum 60 mm O.D.
APPLICATIONS: Suitable for highways & important city roads with high density, high speed traffic where regular maintenance is not
REFLECTOR -PRECISION OPTICS TECH (POT): Lamp compartment is fitted with a reflector known as 'POT' for light control in longitudunal and transverse direction. It is electrochemically brightened and anodised aluminium reflector for better uniformity and high optical efficiency. |
| |
| SSG1525IH / G |
HPSV - T |
1 |
250 |
240 |
1.3 |
571 |
304 |
164 |
10 |
2 |
| MHSG1525IH / G |
MH - T |
1 |
250 |
240 |
1.3 |
571 |
304 |
164 |
10 |
2 |
| MHSG1525IHM / G |
MH - T |
1 |
250 |
240 |
1.3 |
571 |
304 |
164 |
8 |
2 |
|
| |
| |
*Suitable only for HPIT + 250 W Philips make Metal halide lamp. |
| |
| |
| ---------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
| |
Citistar Streetlight LuminaireSSG12-FG,MHSG12-FG [IP65]
|
| |
|
| |
 |
|
LUMINAIRE: Comprises a deep drawn aluminium housing in stove enamel hammertone grey finish. A toughened heat resistant clear glass covering the lamp as well as control gear housing is held in position by stainless steel toggles .The control gear housing is prewired with copper wound ballast, power factor improvement capacitor, electronic ignitor etc. mounted on hingeable gear tray for ease of maintainance . A synthetic rubber gasket ensures high degree of ingress protection.
|
|
| |
REFLECTOR - PRECISION OPTICS TECH (POT):
The inner surface of the lamp compartment is anodised and imparted sand blasting finish to act as a reflector.
CABLE ENTRY:
Incoming wires terminate on the mains connector inside the control gear housing.
RELAMPING:
can be carried out easily by releaising toggles and opening glass cover hinged to the housing.
MOUNTING:
An external cast aluminium assembly provided which is suitable for pipe having 40mm to 60 mm O.D.
APPLICATIONS:
Suitable for illuminating city roads, traffic routes, access roads etc. |
| |
| SSSG1215IH / G |
HPSV - T |
1 |
150 |
240 |
0.71 |
615 |
296 |
180 |
6.5 |
1 |
| SSSG1225IH / G |
HPSV - T |
1 |
250 |
240 |
1.3 |
615 |
296 |
180 |
8.5 |
1 |
| MHSSG1225IH / G |
MH - T |
1 |
250 |
240 |
1.3 |
615 |
296 |
180 |
8.5 |
1 |
| MHSSG1225IHM / G |
MH - T |
1 |
250 |
240 |
1.3 |
615 |
296 |
180 |
6.5 |
1 |
|
| |
| *Suitable only for HPIT + 250 W Philips make Metal halide lamp. |
| |
| |
| ---------------------------------------------------------------------------------------------------------------------------------------- |
|
| |
|
![CFL PARKING LIGHT SCPL [IP143]](images/Streetlight/CFL_PARKING_LIGHT_SCPL.jpg)
![CFL PARKING LIGHT SCPL [IP143]](images/Streetlight/CFL_PARKING_LIGHT_SCPL_graph.jpg)
